Aika A ImelHasken Wutar Lantarki na PVC mai ƙyalli na PVC Sheath BVV Waya Gina don Kafaffen Waya.
Aikace-aikace:
60227 IEC 10 BVV Wutar Ginin Wutar Lantarki ana amfani dashi a cikin shigarwar wutar lantarki, kayan lantarki na gida, kayan aiki, kayan sadarwa, sarrafa sauyawa, ba da sanda da bangarorin kayan aiki na wutar lantarki da dalilai kamar masu haɗin ciki a cikin kayan gyarawa, injin farauta da masu sarrafawa.
.
Ayyukan Fasaha:
Ƙimar Wutar Lantarki (Uo/U):300/500V
zazzabi mai gudanarwa:Matsakaicin zafin jiki na jagora a amfani na yau da kullun: 70ºC
Yanayin shigarwa:Yanayin zafin jiki a ƙarƙashin shigarwa bazai zama ƙasa da 0ºC ba
Ƙananan radius na lanƙwasa:
Lankwasawa radius na USB: (D-Diameter na USB)
D≤25mm----≥4D
D> 25mm ------------------- 6D
Gina:
Mai gudanarwa:Yawan muryoyi: 1,2,3,4 ko 5
Masu gudanarwa za su bi ka'idodin da aka bayar a cikin IEC 60228 don aji 1 ko 2.
- aji na 1 don masu jagoranci masu ƙarfi;
- aji na 2 don masu gudanar da tarko;
Insulation:PVC (Polyvinyl Chloride) Nau'in PVC / C bisa ga IEC
Sheath:PVC (Polyvinyl Chloride) Nau'in PVC / ST4 bisa ga IEC
Ƙayyadaddun bayanai:
60227 IEC 10 Standard
60227 IEC 10 Hasken PVC mai rufin PVC Sheath BVV Gina Waya
| Yankin Ƙirar Ƙimar Ƙimar Mai Gudanarwa | Class na madugu | Nau'in Insulation Kauri | Max.General Diamita | Max.DCResistance a 20 ℃ (Ω/km) | Min. Insulation Resistance a 70 ℃ | |
| (mm²) | / | (mm) | (mm) | A fili | Karfe mai rufi | (Ω/km) |
| 2 × 1.5 | 1 | 0.7 | 10 | 12.1 | 12.2 | 0.011 |
| 2 × 1.5 | 2 | 0.7 | 10.5 | 12 | 12.2 | 0.01 |
| 2 × 2.5 | 1 | 0.8 | 11.5 | 7.41 | 7.56 | 0.01 |
| 2 × 2.5 | 2 | 0.8 | 12 | 7.41 | 7.56 | 0.009 |
| 2×4 | 1 | 0.8 | 12.5 | 4.61 | 4.7 | 0.0085 |
| 2×4 | 2 | 0.8 | 13 | 4.61 | 4.7 | 0.0077 |
| 2×6 | 1 | 0.8 | 13.5 | 3.08 | 3.11 | 0.007 |
| 2×6 | 2 | 0.8 | 14 | 3.08 | 3.11 | 0.0065 |
| 2×10 | 1 | 1 | 16.5 | 1.83 | 1.84 | 0.007 |
| 2×10 | 2 | 1 | 17.5 | 1.83 | 1.84 | 0.0065 |
| 2×16 | 1 | 1 | 20 | 1.15 | 1.16 | 0.0052 |
| 2 ×25 | 2 | 1.2 | 24 | 0.727 | 0.734 | 0.005 |
| 2×35 | 1 | 1.2 | 27.5 | 0.524 | 0.529 | 0.0044 |
| 3 × 1.5 | 2 | 0.7 | 10.5 | 12.1 | 12.2 | 0.011 |
| 3 × 1.5 | 1 | 0.7 | 11 | 12.1 | 12.2 | 0.01 |
| 3 × 2.5 | 2 | 0.8 | 12 | 7.41 | 7.56 | 0.01 |
| 3 × 2.5 | 1 | 0.8 | 12.5 | 7.41 | 7.56 | 0.009 |
| 3×4 | 2 | 0.8 | 13 | 4.61 | 4.7 | 0.0085 |
| 3×4 | 1 | 0.8 | 13.5 | 4.61 | 4.7 | 0.0077 |
| 3×6 | 2 | 0.8 | 14.5 | 3.08 | 3.11 | 0.007 |
| 3×6 | 1 | 0.8 | 15.5 | 3.08 | 3.11 | 0.0065 |
| 3×10 | 2 | 0.1 | 17.5 | 1.83 | 1.84 | 0.007 |
| 3×10 | 1 | 1 | 19 | 1.83 | 1.84 | 0.0065 |
| 3×16 | 2 | 1 | 21.5 | 1.15 | 1.16 | 0.0052 |
| 3 ×25 | 1 | 1.2 | 26 | 0.727 | 0.734 | 0.005 |
| 3 ×35 | 2 | 1.2 | 29 | 0.524 | 0.529 | 0.0044 |
| 4 × 1.5 | 2 | 0.7 | 11.5 | 12.1 | 12.2 | 0.011 |
| 4 × 1.5 | 1 | 0.7 | 12 | 12.1 | 12.2 | 0.01 |
| 4 × 2.5 | 2 | 0.8 | 13 | 7.41 | 7.56 | 0.01 |
| 4 × 2.5 | 1 | 0.8 | 13.5 | 7.41 | 7.56 | 0.009 |
| 4×4 | 2 | 0.8 | 14.5 | 4.61 | 4.7 | 0.0085 |
| 4×4 | 1 | 0.8 | 15 | 4.61 | 4.7 | 0.0077 |
| 4×6 | 2 | 0.8 | 16 | 3.08 | 3.11 | 0.007 |
| 4×6 | 1 | 0.8 | 17 | 3.08 | 3.11 | 0.0065 |
| 4×10 | 2 | 1 | 19 | 1.83 | 1.84 | 0.007 |
| 4×10 | 1 | 1 | 20.5 | 1.83 | 1.84 | 0.0065 |
| 4×16 | 2 | 1 | 23.5 | 1.15 | 1.16 | 0.0052 |
| 4 ×25 | 1 | 1.2 | 28.5 | 0.727 | 0.734 | 0.005 |
| 4×35 | 2 | 1.2 | 32 | 0.524 | 0.529 | 0.0044 |
| 5 × 1.5 | 1 | 0.7 | 12 | 12.1 | 12.2 | 0.011 |
| 5 × 1.5 | 2 | 0.7 | 12.5 | 12.1 | 12.2 | 0.01 |
| 5 × 2.5 | 1 | 0.8 | 14 | 7.41 | 7.56 | 0.01 |
| 5 × 2.5 | 2 | 0.8 | 14.5 | 7.41 | 7.56 | 0.009 |
| 5×4 | 1 | 0.8 | 16 | 4.61 | 4.7 | 0.0085 |
| 5×4 | 2 | 0.8 | 17 | 4.61 | 4.7 | 0.0077 |
| 5×6 | 1 | 0.8 | 17.5 | 3.08 | 3.11 | 0.007 |
| 5×6 | 2 | 0.8 | 18.5 | 3.08 | 3.11 | 0.0065 |
| 5×10 | 1 | 1 | 21 | 1.83 | 1.84 | 0.007 |
| 5×10 | 2 | 1 | 22 | 1.83 | 1.84 | 0.0065 |
| 5×16 | 2 | 1 | 26 | 1.15 | 1.16 | 0.0052 |
| 5×25 | 2 | 1.2 | 31.5 | 0.727 | 0.734 | 0.005 |
| 5×35 | 2 | 1.2 | 35 | 0.524 | 0.529 | 0.0044 |
Ƙarin Samfura
